Click to zoom
SEARCH PRODUCTS
Manufacturer: Accel
SKU: 140404S
ACCEL engineers designed these coils special low-resistance primary winding to match the operating characteristics of factory and aftermarket CDI systems.Maximum performance with fast rise times.Faster rise time, increased spark energy and longer spark duration results in up to 45% higher voltage than O.E.M. coils.Unique molded case with finned top prevents carbon tracking.Bolt-on installation.Manufacturers lifetime replacement warranty.Using the wrong coil may damage your motorcycles electronic ignition module. To determine your ignition type, complete the following test:.1. Determine whether the type of coil you are replacing is a high tower coil. (These coils will NOT replace single tower coils.).2. Using a volt meter or 12V test light, hook the positive lead to the positive post and the negative lead to the ground on one of the stock coils..3. Turn the ignition on, but DO NOT engage the starter button..4. If there are 12V at the coil, the motorcycle has an inductive type ignition. If there is no voltage at the coil, then the motorcycle has a CDI ignition because.the power goes to the control box first..4 Cylinder Model.Two Coil Kit.Inductive Discharge Ignition.Primary Resistance is 3.0 Ohms.Made in the USA 2 Cylinder Model.One Coil Kit
| Weight | 1 kg |
| SKU | 140404S |
| Name | Super Coil Kit - 2 Cylinder (One-Coil) - CDI |
| Description |
Super Coil Kit - 2 Cylinder (One-Coil) - CDIManufacturer: Accel SKU: 140404S ACCEL engineers designed these coils special low-resistance primary winding to match the operating characteristics of factory and aftermarket CDI systems.Maximum performance with fast rise times.Faster rise time, increased spark energy and longer spark duration results in up to 45% higher voltage than O.E.M. coils.Unique molded case with finned top prevents carbon tracking.Bolt-on installation.Manufacturers lifetime replacement warranty.Using the wrong coil may damage your motorcycles electronic ignition module. To determine your ignition type, complete the following test:.1. Determine whether the type of coil you are replacing is a high tower coil. (These coils will NOT replace single tower coils.).2. Using a volt meter or 12V test light, hook the positive lead to the positive post and the negative lead to the ground on one of the stock coils..3. Turn the ignition on, but DO NOT engage the starter button..4. If there are 12V at the coil, the motorcycle has an inductive type ignition. If there is no voltage at the coil, then the motorcycle has a CDI ignition because.the power goes to the control box first..4 Cylinder Model.Two Coil Kit.Inductive Discharge Ignition.Primary Resistance is 3.0 Ohms.Made in the USA 2 Cylinder Model.One Coil Kit
|
No reviews yet. Be the first to review this product!
Login to write a review.
You might also like these products
